Reviews
With extra features like a built-in temperature control thermostat, digital temperature read-out and an error indicator read-out, this heater is a reliable source of heat for a comfortable work environment.
Motor: Heavy-duty, cast aluminum enclosed electric motor
Burner Head: 1-piece cast aluminum
Components: Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Pneumatic tires
Factory Tested for Multiple Fuels: Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel
Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.
Specifications
-
Heat Output: 600,000 BTU
-
Hot-Air Flow: 3,000 CFM
-
Air Pump Pressure: 128 PSI
-
AC Power: 120V, 60Hz, 5.5 Amps
-
Motor Size: 5/8 HP
-
Fuel Tank Capacity: 40.0 gallons
-
Fuel Consumption: 4.50 gal./hr.
-
Max. Operating Hours: 8.9 hours
-
Heating Area: 15,000 sq. ft.
-
Multi-Fuel Capable: Yes
-
Digital Temp. Read-Out: Yes
-
Error Indicator Read-Out: Yes
-
Parts Storage System: Yes
Weights & Dimensions
-
Net Weight: 320.00 lbs.
-
Shipping Weight: 376.00 lbs.
-
Length: 75.00 in.
-
Width: 34.00 in.
-
Height: 43.00 in.
** Free Freight (LTL) Shipping
