This AGW Series combines an air compressor, generator and welder into one machine, making it the complete on-site unit to efficiently tackle numerous jobs at once.
Compressor Pump: Cast iron compressor pump · Splash lubricated · Stainless-steel braided discharge hose · Large canister intake filter · Oil level sight indicator
Generator: Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings
Welder: Amperage selection switch, 170A or 220A maximum
Frame: Powder coated ASME receiver tank · Powder coated four-piece belt guard
Components: Regulator and two gauges for tank and outlet pressure · Manual drain valves for proper maintenance · 16 1/2-inch fly wheel
AGW Series Operation
Generator Mode: AC current only · Selector switch set to idle down · Switch is set to full throttle
Welder Mode: DC current only · Engine must be running full throttle · Selector switch must be set to full throttle
All models sold in California are required to have the AX-0080 CARB compliant fuel tank.
Equipped with 150-PSI maximum rated regulator.
Specifications
-
Displacement/ Engine: 688cc Honda GX690 OHV with Electric Start - Battery Cables Included; Battery Not Included
-
Rated Speed: 3600 RPM
-
CFM @ 90 PSI: 30.5
-
CFM @ 175 PSI*: 29.0
-
Tank Size: 20-gallon
-
Max. AC Output: 5000 watts
-
Rated AC Output: 4500 watts
-
Alternator Wattage: Cont. On-Load @ 90 PSI: 4500 watts
-
Alternator Wattage: Cont. On-Load @ 175 PSI: 4500 watts
-
Frequency/Voltage: 60Hz/120V/240V
-
Max. Amps (120V/240V): 41.5/20.8
-
Cont. Amps (120V/240V): 37.5/18.8
-
Receptacles: (2) 120V, 20A GFCI Duplex; (1) 120V/240V, 20A Twist Lock
-
Duty Cycle (10 Min. Run Time): 220A @ 40%, 190A @ 60%, 150A @ 100%
-
DC Voltage: 50-220A Working Range
-
Fuel Tank: 10-gallon
Weights & Dimensions
-
Net Weight: 803.00 lbs.
-
Shipping Weight: 870.00 lbs.
-
Length: 47.00 in.
-
Width: 24.00 in.
-
Height: 50.00 in.
** Free Freight (LTL) Shipping
