Complete Industrial Sandblast Kit – Dustless Pressure Washer Attachment
Turn Your Pressure Washer Into a Sandblasting Powerhouse
The Complete Industrial Sandblast Kit offers high-impact cleaning by combining sand and pressurized water to remove rust, paint, graffiti, grease, and more — all without the massive dust cloud of dry sandblasting. Designed with the same venturi draw principle found in MTM foam cannons, this kit transforms your pressure washer into a powerful wet sandblaster.
Perfect for heavy-duty contractors, industrial surface prep, and restoration pros, the kit includes everything you need for fast setup and reliable performance. With dual nozzle options and a 1/4" quick-connect plug, installation is a breeze.
Dustless Wet Sandblasting
-
Uses the venturi effect to pull sand media into your water stream
-
Minimizes airborne dust for cleaner, safer work conditions
-
Ideal for removing rust, coatings, paint, and heavy buildup
Dual Threaded Nozzles Included
-
Comes with 0° 4.0 and 0° 5.0 threaded nozzles to match your GPM/PSI
-
Choose the correct orifice for best performance (see tips below)
Heavy-Duty Construction
-
Industrial-grade blast head and sand probe
-
Clear reinforced hose for visibility and control
-
Plated 1/4" steel male plug for fast hookup
Quick Setup, Maximum Versatility
-
Compatible with most 3–8 GPM, 3,000–5,000 PSI pressure washers
-
Works with standard sand media
-
Includes teflon tape for leak-free installation
| Specification | Details |
| Brand | MTM Hydro |
| Part Number | 17.0252 |
| Required GPM | 3-8 GPM |
| Required PSI | 3000-5000 PSI |
| Inlet Connection | 1/4" Steel Male Plug (Included) |
| Nozzles Included | 0° 4.0 & 0° 5.0 (threaded) |
| Compatibility | Most professional-grade pressure washers |
What’s Included
-
(1) Industrial Sandblast Kit with Blast Head, Probe, and Hose
-
(1) 0° 4.0 Threaded Nozzle
-
(1) 0° 5.0 Threaded Nozzle
-
(1) 1/4" Steel Male Plug
-
(1) Roll of Teflon Tape
Usage Tips
-
Use the correct nozzle based on your machine’s PSI and GPM. Undersized or oversized nozzles will affect performance.
-
Keep your sand/media dry. Moisture causes clogs and flow issues.
-
Keep the draw hose dry inside. Avoid dips or moisture intrusion.
-
Point the sand barb upward. Gravity helps feed media into the chamber and reduces backflow.
-
Minimize start-stop cycles. Stopping the flow can cause valleys of settled sand in the draw hose, leading to flow surges or clogging when you restart.
