Airless Paint Sprayers
HVLP Paint Sprayers
Line Stripers
Texture Sprayers
Paint Spray Guns
Pressure Pots
Gas Pressure Washers
Electric Pressure Washers
Hot Water Pressure Washers
Surface Cleaners
Pressure Washer Pumps
This compact rebar bender is ideal for both high-production workshops or job sites.
- Bends rebar up to 1-inch (25 mm), up to 180 degrees diameter in seconds
- Angle adjustment knob allows fine tuning of bending angle
- Standard foot switch provides the operator the ability to free up hands for safe material handling
- Driven by a 115-Volt, single-phase electric motor @ 13 amps
- A complete set of rollers and collars is included to quickly change your bending radius
- Two built-in lifting handles are provided for easy movement around the job site
| Max. Rebar Diameter | 1 in | 25.4 mm |
| Bending Range | 0 to 180 | |
| Max. Bending Speed | 180° - Approx. 5 sec | |
| Electric Motor | 115V, 60 Hz, 1Ø, AC | |
| No. 3 Rebar | Diameter | 3/8 in | 9.5 mm |
| Radius | 1.125 in | 29 mm | |
| No. 4 Rebar | Diameter | 1/2 in | 12.7 mm |
| Radius | 1.5 in | 38 mm | |
| No. 5 Rebar | Diameter | 5/8 in | 15.9 mm |
| Radius | 1.875 in | 48 mm | |
| No. 6 Rebar | Diameter | 3/4 in | 19 mm |
| Radius | 2.25 in | 57 mm | |
| No. 7 Rebar | Diameter | 7/8 in | 22.2 mm |
| Radius | 2.625 in | 67 mm | |
| No. 8 Rebar | Diameter | 1 in | 25.4 mm |
| Radius | 3 in | 76 mm |
| Standard Accessories | Foot Switch Rollers (5 sizes) Collars (6 sizes) Tool Kit Waterproof Cover |
|
| Overall Length | 21 in | 530 mm |
| Overall Width | 19.5 in | 500 mm |
| Overall Height | 17 in | 430 mm |
| Operating Weight | 227 lb | 103 kg |
| Shipping Weight | 331 lb | 150 kg |
Notice: Features and equipment specifications are subject to change without notice.
