Airless Paint Sprayers
HVLP Paint Sprayers
Line Stripers
Texture Sprayers
Paint Spray Guns
Pressure Pots
Gas Pressure Washers
Electric Pressure Washers
Hot Water Pressure Washers
Surface Cleaners
Pressure Washer Pumps
This stainless steel nozzle has a 1/4 inch male NPT connection, 0 degree fan pattern, and size 40 orifice. The nozzle is constructed of stainless steel for maximum resistance to rust and corrosion caused by chemicals. This series of nozzles is ideal for pressure washing, soft washing, and downstream chemical injection applications.
NOTE: The product received may differ slightly from the product pictured.
Description
- High-impact sprays and high pressure operation ensure optimal cleaning – ideal for pressure washing
- Long wear life – 400 series stainless steel material
- Flat spray nozzles provide an even edge fan type spray pattern
- Uniform spray distribution from .27 to 78 gpm (1.0 to 290 lpm) by using optional internal guide vane to stabilize liquid turbulence
- Spray angles from 0° (solid stream) to 65° for MEG, WEG and MEG-SSTC; 0° to 80° for IMEG
- Operating pressures from 300 to 4000 psi (20 to 275 bar)
- MEG-SSTC nozzles have tungsten carbide orifice inserts for maximum erosion resistance
- IMEG® versions are ideal for critical, demanding operations Features:
- Patented design that optimizes fluid dynamics by minimizing turbulence
- Higher impact per unit area than MEG nozzles
Flow
As the liquid exits through the rounded U shape of the orifice, it forms into a flat spray pattern. The distribution is even at pressures above 300 psi (20 bar).
Specification Summary
Impact Group: High Impact
Inlet Connection Gender: Male
Inlet Connection Size: 1/4 in.
Inlet Connection Thread Type: NPT
Inlet Connection Type: Threaded (Male NPT)
Liquid Flow Rate Range: 4 GPM - 35 GPM
Liquid Pressure Range: 40 PSI - 3000 PSI
Material Composition: Hardened Stainless Steel
Relative Drop Size Range: 500 µm - 5000 µm
Spray Pattern: Solid Stream
Product Type: Nozzle
