Stealth Command Wash: Blitz | Alkaline Soap – Step 2 Soap & Degreaser for Touchless 2-Step Fleet Washing (Non-Polish Safe)

Stealth Command Wash: Blitz | Alkaline Rinse & Degreaser (Step 2)

The final punch in your touchless 2-step wash system.

Stealth Command Wash: Blitz is the Step 2 in the ultimate touchless 2-step fleet washing system. Blitz is an aggressive alkaline rinse that neutralizes acid, lifts road grime, and rinses your fleet clean without any scrubbing reuqired. Blitz is formulated to tackle the worst carbon stack stains, magnetic road film, and grease buildup left behind after your acid pre-spray (Step 1: Breach) has done its job. 

Perfect for cleaning aluminum surfaces, wheels, tanks, trailers, undercarriages, and more, Breach is a go-to for professionals washing box trucks, semi fleets, delivery vans, flatbeds, tankers, and heavy equipment. Let Blitz become the heavy-duty finisher that leaves your fleet clean, degreased, and ready to shine. This 55-gallon drum of Blitz packs enough Step 2 cleaning power to keep your rigs rolling clean, day in and day out.

For maximum performance, pair Blitz with the Stealth Commander 2-Step System and Stealth Command Wash: Breach for unmatched speed, safety, and touchless results.

NOTE: For best results, use immediately after Step 1: Stealth Command Wash: Breach

 

• Step 2 Alkaline Rinse: Neutralizes acid and lifts away the broken-down grime, carbon, and road film from Step 1—completing the touchless 2-step wash process.

• Aggressive Alkaline Cleaning: Dissolves carbon stains, oils, road film, and grime loosened by Step 1 acid pre-spray.

• Brush-Free Performance: Delivers powerful results with no manual scrubbing or agitation required.

• Safe on Paint & Aluminum: Built to clean without damage when used at proper dilutions.

• Cold or Hot Water Compatible: Rinses clean in any temp—ideal for mobile washes or automated setups.

• Hard Water Resistant: Performs reliably even in areas with up to 20 grains of hard water.

• High-Yield Concentrate: Super concentrated and highly dilutable—ideal for high-volume fleet washing.

How to Use (Step 2 - Alkaline Rinse)

1. Dilute Before Use
   • Hot Water: 1:100
   • Cold Water: 1:50
   • Do not use undiluted
2. Apply Immediately After Acid Step
   • Spray Blitz from the bottom and work your way up directly after Step 1: Breach has been applied. Ensure even coverage.
3. Do Not Let Dry
   • Avoid applying in direct sunlight or on hot surfaces.
4. Follow Immediately with Step 2
   • Rinse using Stealth Command Wash: Blitz to neutralize and lift remaining contaminants for a clean finish.
5. Final Rinse
   • Rinse with high-pressure water to remove remaining dirt, soap, and residues.