The M5 Twist & C&R SharpShooter Combo – 4 GPM combines adjustable spray coverage and dedicated long-range reach in one professional dual-nozzle setup. Built for pressure washing, downstreaming, and soft washing, the assembly pairs a 3–7 GPM M5-style adjustable nozzle with a purple 3.5 mm C&R SharpShooter, giving contractors two distinctly different spray patterns at the end of the gun. Each combo is fully assembled by Spraywell and ready to connect and use out of the box.
The Italian-made M5-style nozzle rotates from a concentrated stream to a wide 60° fan, allowing the operator to adjust coverage for siding, chemical application, rinsing, and close-to-medium-range work. When maximum reach becomes the priority, switch to the C&R SharpShooter for a tighter, concentrated stream designed to reach rooflines, peaks, upper stories, and other elevated surfaces from the ground.
The included purple C&R SharpShooter uses forced-cone technology, with a larger entrance opening tapering toward a smaller 3.5 mm exit. This geometry helps reduce atomization and keep the stream together for improved long-range performance compared with a conventional straight shooter nozzle.
Both nozzles are mounted on a dual nozzle holder with the fittings and stainless steel quick-connect plug needed to create a compact, ready-to-connect assembly. Instead of stopping to swap individual tips as the job changes, contractors have adjustable coverage and long-range shooting available from the same nozzle setup.
Two Spray Patterns. One Professional Setup.
Professional exterior cleaning rarely calls for one spray pattern from start to finish.
You may need a broad fan to apply solution efficiently across siding, then a concentrated stream seconds later to reach a peak or upper story. The M5 Twist and C&R SharpShooter are paired specifically to handle both sides of that workflow.
M5 Twist – Adjustable 0–60° Coverage
The 3–7 GPM M5-style nozzle gives the operator control over the spray pattern without changing tips. Simply rotate the adjustable head to transition from a concentrated stream through progressively wider patterns up to a 60° fan.
Use it for broad chemical coverage, house washing, siding, rinsing, and applications where spray-pattern control matters more than maximum shooting distance.
The professional-grade nozzle is manufactured in Italy with stainless steel and plastic construction and is rated up to 4060 PSI and 194°F.
C&R SharpShooter – Dedicated Long-Range Reach
When distance becomes the priority, switch to the purple 3.5 mm C&R SharpShooter.
Designed around C&R's forced-cone geometry, the SharpShooter concentrates the stream and reduces atomization to help solution remain together over greater distances. This makes it particularly useful for reaching roof peaks, upper siding, multi-story surfaces, and other elevated areas from the ground.
Together, the two nozzles give contractors the ability to choose coverage or reach based on the surface in front of them without changing the entire nozzle assembly.
C&R Forced-Cone Technology
The C&R SharpShooter isn't simply another straight shooter tip.
A traditional shooter nozzle may maintain similar entrance and exit dimensions through the nozzle. The SharpShooter instead uses a larger entrance that tapers toward a smaller exit, creating C&R's forced-cone design.
For the 4 GPM combo, the included purple SharpShooter uses a 3.5 mm exit orifice.
The design helps provide:
-
A tighter, more concentrated stream
-
Reduced solution atomization
-
Improved long-range performance
-
Better stream integrity at distance
-
Greater reach for elevated exterior surfaces
For professional exterior cleaners, that means a dedicated long-range option when the adjustable M5 pattern isn't enough to reach the target.
Frequently Asked Questions
What is the M5 Twist & SharpShooter Combo used for?
The M5 Twist & SharpShooter Combo gives professional exterior cleaners adjustable spray coverage and dedicated long-range reach from one dual-nozzle assembly.
Use the M5-style adjustable nozzle when you need a controlled fan pattern for siding, chemical application, rinsing, and general exterior cleaning. Switch to the C&R SharpShooter when you need a concentrated stream for rooflines, peaks, upper stories, and other distant surfaces.
What spray pattern does the M5 Twist provide?
The M5-style nozzle is adjustable from approximately 0° to 60°. Rotate the nozzle head to move between a concentrated stream and progressively wider fan patterns without changing nozzle tips.
The M5 nozzle included with the 4 GPM combo is the 3–7 GPM version.
Which C&R SharpShooter comes with the 4 GPM combo?
The 4 GPM combo includes the purple C&R SharpShooter with a 3.5 mm orifice. The purple SharpShooter is paired with the 3–7 GPM M5-style adjustable nozzle to create the 4 GPM configuration, providing both adjustable spray coverage and a dedicated forced-cone nozzle for long-range application.
What does C&R forced-cone technology do?
The SharpShooter uses a larger entrance opening that tapers toward a smaller exit. This geometry helps concentrate the solution stream and reduce atomization, allowing the stream to remain together better during long-range application.
Can the SharpShooter reach multiple stories?
The C&R SharpShooter is specifically designed for long-range application and is commonly used to reach roof peaks, upper siding, and multi-story surfaces from the ground.
Actual reach varies based on system flow, pressure, hose length, plumbing, elevation, chemical draw, and other equipment variables.
Can I use this combo for downstreaming?
Yes. The M5-style adjustable nozzle is compatible with downstream applications, and the dual-nozzle setup gives contractors both an adjustable application pattern and a dedicated long-range SharpShooter option.
Actual chemical draw depends on the downstream injector, nozzle selection, machine output, hose configuration, and overall system setup.
Can this combo be used with a soft wash system?
Yes. The M5-style nozzle is designed for use with gas, air, and electric soft wash systems in addition to downstream applications.
SharpShooter sizing should be matched appropriately to the pump and system being used, since pressure washer and dedicated soft wash pump configurations operate differently.
Why pair an M5 Twist with a SharpShooter?
Because maximum reach and maximum coverage require different spray characteristics.
The M5-style nozzle provides adjustable 0–60° coverage, while the SharpShooter provides a dedicated concentrated stream for long-range application. Mounting both on a dual holder gives the contractor immediate access to either spray style without carrying a single fixed-pattern nozzle setup.
-
Dual-Nozzle Design: Adjustable M5-style nozzle and dedicated C&R SharpShooter mounted together in one assembly.
-
0–60° Adjustable Spray Pattern: Rotate the M5 nozzle head to move from a concentrated stream to a wide fan.
-
3–7 GPM M5 Nozzle: Correct M5-style nozzle range for the 4 GPM configuration.
-
Purple 3.5 mm C&R SharpShooter: Color-coded forced-cone nozzle paired with the 3–7 GPM M5-style adjustable nozzle for the 4 GPM combo.
-
Forced-Cone Technology: C&R's tapered nozzle geometry helps reduce atomization and maintain a concentrated stream at distance.
-
Long-Range Application: Designed for rooflines, peaks, upper siding, and elevated exterior surfaces.
-
Professional M5 Construction: Italian-manufactured stainless steel and plastic adjustable nozzle.
-
4060 PSI M5 Rating: Supports professional pressure washing and downstream applications.
-
194°F M5 Temperature Rating: Suitable for a broad range of professional cleaning equipment.
-
Pressure Washing & Soft Washing: Built for professional downstream, gas, air, and electric soft wash applications.
-
Ready-to-Connect Assembly: Includes the dual nozzle holder, connector fitting, and stainless steel male quick-connect plug.
| Specification | Details |
| Part Number | M5-SS-4 |
| Product Type | Dual Adjustable & Long-Range Nozzle Assembly |
| Recommended Pressure Washer Flow | 4 GPM |
| M5 Nozzle Type | Adjustable Downstream & Soft Wash Nozzle |
| M5 Flow Range | 3-7 GPM |
| M5 Spray Pattern | Adjustable 0-60 Degrees |
| M5 Maximum Pressure | 4060 PSI |
| M5 Temperature | 194°F |
| M5 Thread | 1/4" MPT |
| M5 Length | 3.5" |
| M5 Construction | Stainless Steel |
| M5 Country of Manufacture | Italy |
| SharpShooter Brand | C&R |
| SharpShooter Color | Purple |
| SharpShooter Orifice | 3.5 mm |
| Quick Connect Plugs | 1/4" Male Plug, Stainless Steel (included) |
| Applications | Pressure Washing, Downstreaming, Soft Washing |
What's Included
-
(1) M5-Style Adjustable Downstream & Soft Wash Nozzle – 3–7 GPM
-
(1) C&R Purple SharpShooter Nozzle – 3.5 mm / 4 GPM Configuration
-
(1) Dual Nozzle Holder
-
(1) 1/4" MNPT × 1/4" MNPT Nipple Connector – 5000 PSI
-
(1) 1/4" MNPT Stainless Steel Male Quick-Connect Plug
Recommended Applications
-
Professional Pressure Washing
-
Professional Soft Washing
-
Downstream Chemical Application
-
Long-Range Chemical Application
-
House Washing
-
Siding Cleaning & Treatment
-
Roofline & Peak Application
-
Multi-Story Exterior Cleaning
-
Upper-Story Siding
-
Commercial Building Washing
-
High-Reach Exterior Cleaning
-
Gas-Powered Soft Wash Systems
-
Electric Soft Wash Systems
