Stealth Mineral RX is a professional-grade, concentrated acid cleaner formulated to remove stubborn efflorescence, calcium deposits, calcium carbonate, hard water stains, and mineral buildup from masonry and exterior surfaces. Designed for professional pressure washing, masonry restoration, and exterior cleaning, Mineral RX targets the mineral deposits that ordinary detergents and degreasers are not designed to remove.
From white, powdery efflorescence on brick and pavers to stubborn calcium buildup on concrete and masonry, Mineral RX provides adjustable cleaning strength for different surfaces and levels of staining. Its concentrated formula can be diluted from 1:1 to 1:12, depending on the application, helping contractors match cleaning strength to the severity of the deposits.
Mineral RX is suitable for a broad range of masonry and exterior materials, including concrete, brick, pavers, natural stone, and stucco, subject to surface compatibility testing. At stronger concentrations, it can also be used to etch suitable concrete surfaces in preparation for painting or coating applications.
Whether restoring the appearance of mineral-stained masonry, cleaning hard water deposits, or preparing concrete for coatings, Stealth Mineral RX delivers a professional acid-cleaning solution for demanding exterior cleaning applications.
For Professional Use Only.
Target Stubborn Mineral Deposits at the Source
Not every exterior stain responds to conventional pressure washing or alkaline cleaning chemicals. Efflorescence, calcium deposits, and hard water stains are mineral-based problems that often require a different cleaning approach.
Stealth Mineral RX uses a concentrated acidic formulation to help dissolve and remove mineral deposits from compatible surfaces.
Efflorescence Removal
Efflorescence appears as a white, powdery or crystalline residue on masonry surfaces when moisture transports soluble salts to the surface and evaporates.
Mineral RX helps remove visible efflorescence from compatible brick, concrete, pavers, and masonry, restoring a cleaner appearance without relying on pressure alone.
Because efflorescence can return when underlying moisture conditions persist, cleaning removes existing deposits but does not eliminate the source of moisture.
Calcium & Hard Water Stain Removal
Calcium carbonate deposits and hard water stains can leave white, chalky, or crusted buildup on concrete, masonry, and other exterior materials.
Mineral RX targets these deposits with adjustable dilution strengths for light mineral staining through heavier calcium accumulation.
Masonry Cleaning & Restoration
Mineral deposits can affect the appearance of brickwork, pavers, exposed aggregate, and natural stone.
Mineral RX provides professional cleaners with an acid-based option for removing compatible mineral staining while allowing concentration, dwell time, and agitation to be adjusted for the job.
Concrete Etching & Surface Preparation
At stronger concentrations, Mineral RX can also be used to etch suitable concrete surfaces before painting or coating applications.
Concrete preparation should follow the requirements of the coating manufacturer, including surface profile, rinsing, and any required pH verification.
Adjustable Dilution for Different Cleaning Conditions
Mineral deposits vary in thickness, composition, and how firmly they adhere to a surface. Mineral RX is supplied as a concentrate so contractors can adjust the cleaning strength based on the surface and severity of staining.
| Application | Suggested Dilution |
| Thick Calcium Deposits & Concrete Preparations for Coatings | 1:1 to 1:4 |
| Medium Mineral Stains | 1:4 to 1:8 |
| Light Mineral Stains | 1:8 to 1:12 |
| Powdery Efflorescence Coverings | 1:12 |
| General Masonry Cleaning | 1:8 |
Dilution guidance: Ratios represent 1 part Mineral RX to the indicated parts of water. Always add acid concentrate to water, never water to acid. Start with a small test area and adjust based on surface compatibility and cleaning results.
Actual dilution requirements vary with surface porosity, texture, deposit severity, and environmental conditions.
How to Use Stealth Mineral RX
1. Test the Surface
Identify the surface material and test Mineral RX in a small, inconspicuous area before broader application. Confirm that the selected dilution provides the desired cleaning results without unacceptable surface changes.
2. Prepare the Surface
Remove loose dirt, oil, and debris. Pre-clean with a pressure washer where appropriate, then lightly mist the surface with water so it is damp before chemical application.
3. Prepare the Solution
Fill a chemical-resistant mixing container with cold water first. Carefully add Mineral RX concentrate according to the selected dilution.
Always add acid to water, never water to acid.
4. Apply the Cleaner
Using a compatible pump-up or handheld sprayer, apply the solution to the affected surface. Foaming may occur as the cleaner reacts with mineral deposits.
5. Allow Initial Dwell Time
Allow the product to dwell for approximately 20 seconds to 3 minutes, monitoring the reaction and surface condition.
Do not allow the product to dry on the surface.
6. Agitate if Necessary
For heavier deposits, scrub with a suitable stiff-bristled brush or broom. The source instructions allow an additional 1–15 minutes of dwell time where needed, provided the solution remains wet and the surface is compatible.
7. Rinse Thoroughly
Pressure wash and flush the treated area thoroughly with clean water to remove loosened deposits and chemical residue.
8. Inspect and Repeat if Needed
Allow the surface to dry before evaluating the final appearance. Repeat treatment or adjust dilution for stubborn deposits if necessary.
Important: Use appropriate acid-resistant personal protective equipment and application equipment. Protect nearby surfaces, vegetation, and materials that may be affected by acidic cleaners. Follow the current product label and Safety Data Sheet.
Frequently Asked Questions
What is Stealth Mineral RX used for?
Stealth Mineral RX is a concentrated acid cleaner designed to remove efflorescence, calcium deposits, calcium carbonate, hard water stains, and mineral buildup from compatible masonry and exterior surfaces.
It is commonly suited to professional masonry cleaning, concrete cleaning, paver restoration, and mineral stain removal.
Does Mineral RX remove efflorescence from brick and pavers?
Yes. Mineral RX is designed to remove visible efflorescence deposits from compatible brick, pavers, concrete, and other masonry surfaces.
Efflorescence may return if the underlying moisture conditions responsible for transporting salts to the surface are not addressed.
Can Mineral RX remove calcium buildup from concrete?
Yes. Mineral RX is intended for calcium and calcium carbonate deposits on compatible concrete and masonry surfaces.
For thick deposits, the source recommends stronger dilutions between 1:1 and 1:4, subject to testing and surface compatibility.
Is Mineral RX the same as a regular concrete cleaner?
No. Mineral RX is a concentrated acidic cleaner specifically intended for mineral-based deposits such as efflorescence and calcium buildup.
General-purpose concrete cleaners and degreasers are often formulated for different contaminants, including oils, grease, and organic soils.
What dilution should I use for efflorescence removal?
The suggested dilution for light, powdery efflorescence coverings is 1:12. More stubborn mineral staining may require stronger concentrations.
Always test first and adjust the dilution based on the deposit and surface.
Can Mineral RX be used on natural stone?
The source formulation lists limestone, sandstone, riverstone, and other natural stone materials among its potential applications.
However, acidic cleaners can etch, discolor, or permanently damage acid-sensitive stone, including limestone and marble. Do not assume compatibility based on the material name alone. Confirm suitability with the surface manufacturer and conduct a controlled test before use.
Can I use Mineral RX to prepare concrete for painting or coatings?
Yes. At stronger concentrations, Mineral RX may be used to etch suitable concrete surfaces as part of preparation for painting or coatings.
Follow the coating manufacturer's requirements for concrete preparation, surface profile, cleanliness, and pH before applying a coating.
How long should Mineral RX dwell before rinsing?
The source instructions recommend an initial dwell time of approximately 20 seconds to 3 minutes. Additional dwell time and agitation may be used for stubborn deposits, provided the cleaner does not dry and the surface remains compatible.
Always monitor the reaction and rinse thoroughly.
Can Mineral RX be applied with a pressure washer?
The supplied application directions specify a pump-up sprayer or handheld sprayer, followed by pressure washing and thorough rinsing.
Do not run Mineral RX through a pressure washer pump, downstream injector, soft wash pump, or other chemical-delivery equipment unless that equipment is specifically approved for the product's acidic chemistry.
-
Concentrated Efflorescence Remover: Targets white, powdery mineral and salt deposits on compatible brick, concrete, pavers, and masonry.
-
Calcium & Calcium Carbonate Removal: Formulated to remove stubborn mineral buildup and crusted calcium deposits.
-
Hard Water Stain Cleaning: Helps remove mineral staining caused by hard water deposits on compatible exterior surfaces.
-
Adjustable Dilution Strength: Suggested dilutions from 1:1 to 1:12 allow operators to match concentration to cleaning conditions.
-
Professional Masonry Cleaning: Suitable for use on a range of masonry materials when surface compatibility is confirmed.
-
Concrete Surface Preparation: Can be used at stronger concentrations to etch suitable concrete before painting or coatings.
-
Targeted Acid Cleaning: Designed for mineral-based contamination that conventional detergents may not effectively remove.
-
Pressure Washing Workflow: Apply with compatible chemical sprayers and rinse thoroughly using appropriate pressure washing equipment.
-
Professional-Use Formula: Intended for trained operators performing exterior cleaning, masonry maintenance, and restoration
| Specification | Details |
| Brand | Stealth |
| Part Number | SC-MRX-1 |
| Size | 1-Gallon Jug |
| Product Type | Concentrated Acid Cleaner |
| Primary Function | Efflorescence & Calcium Removal |
| Additional Functions | Hard Water Stain Removal, Mineral Deposit Cleaning, Concrete Etching |
| Other Available Sizes | Case of 4 |
| Color | Clear |
| Odor | Strong |
| pH Range | ≤ 1 |
| Suggested Dilutions | 1:1 to 1:12 |
| Application Method | Compatible Pump-up or Handheld Sprayer |
Recommended Applications
-
Efflorescence Removal
-
Calcium & Calcium Carbonate Deposit Removal
-
Hard Water Stain Removal
-
Mineral Deposit Cleaning
-
Brick & Masonry Cleaning
-
Concrete Cleaning & Restoration
-
Paver Cleaning & Restoration
-
Exposed Aggregate Cleaning
-
Commercial Exterior Cleaning
-
Professional Pressure Washing
-
Masonry Restoration & Maintenance
-
Concrete Etching for Coatings Preparation
-
Mineral-Stained Exterior Surface Cleaning